You have no items in your shopping cart.
Do drivers and pedestrians ignore your wimpy horns on your MK7/MK7.5 GTI or Alltrack? Tired of the soft sounds and wimpy tone that left the factory? We had the same concerns with the OEM VW horns and decided it was time for an upgrade! Introducing our in-house designed and engineered SickSpeed Super Loud Horn Kit, made specifically for 2015+ Volkswagen GTI and Alltrack. These massive dual tone SickSpeed Super Loud horns will allow everyone on a city block know that you are upset at that less-than-stellar driver in front of you while adding attractive styling to your VW!
Our in-house engineered, Wrinkle Black Powdercoated, CNC-Bent, 16GA Mild Steel Mounting Bracket positions the pair of horns directly behind the upper radiator grille for maximum sound and visual recognition.
Our in-house designed wiring harness, custom made to fit MK7 GTI/Alltrack, allows the SickSpeed Super Loud horns to operate at maximum volume, while providing for an easy installation solution.
Although these horns can be ran with factory horn wiring and custom pigtails to adapt, you would not be able to reap all of the benefits until you power them with an upgraded, high amperage harness & relay. Our kit utilizes the factory horn harness only to signal the high amperage relay and heavy duty power and ground wires with multi-strand, 14 gauge, automotive grade wire to provide the horns with the power they deserve and the results are apparent!
Our harness features weather-resistant flag terminals, specifically made to fit these horns, pre-crimped ring terminals to pick up battery power and ground , weather-resistant, high amperage capacity relay socket, an in-line fuse holder with a 15AMP fuse and a pre-crimped weather-resistant female wiring connector to pair with the new, male horn connector.
The male horn connector also features weather resistant seals and requires removal of the OEM LH horn connector to crimp on the new terminals. The RH horn connector is intended to be unplugged, yet only needs to be sealed from the elements with our included heat shrink end-cap.
MK7 GTI/Alltrack Horn Mounting Bracket - Wrinkle Black Powdercoated
Horn Nut Protective Caps - Used to protect the A/C condenser from abrasion in this extremely tight area
MK7 GTI/Alltrack Supertone/Super Loud Horn Wiring Harness
Male Horn Connector with terminals and seals for LH horn chassis harness
Heat Shrink Cap for RH horn, chassis-side connector
Your choice in color SickSpeed Super Loud Horns
Hella Higher Amperage Horn Relay
Our ECS SickSpeed Super Loud Horn Kit was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods.
We tested multiple different horn bracket designs and established the best-fitting design solution in this extremely confined area available. Although tight, the fitment is spot on for all MK7 Golf platform vehicles with Honeycomb grilles. Unfortunately the "Slat/Bar" style grilles do not allow for proper fitment due to their increased depth. Honeycomb grilles are available for separate purchase. If you choose to convert your grille first this kit will then be compatible with Golf/Golf R models.
INSTALLATION AND SUPPORT
Looking for installation tips? Look no further, we put together a full installation tutorial from start to finish! See our Installation PDF under the INSTALLATION Tab for more information.
*PLEASE NOTE* The LH horn connector needs removed and our new connector pinned to the chassis-side harness for proper installation. We also recommend disconnecting the RH horn and sealing the connector with the included heat shrink cap.
Due to confined space these are NOT compatible with our ECS Tuning Inlet Scoops.
SickSpeed Super Loud horns sound great and look the part too, however, our testing found these have no increase in dB output as compared to stock 2015 GTI horns.
MK7 Golf/Golf R customers with "slat/bar" grilles must convert to a Honeycomb grille for proper clearance. MK7.5 Golf/Golf R customers with "slat/bar" grilles must convert to a Honeycomb grille for proper clearance as well, however, these only fit WITHOUT Adaptive Cruise Control/Forward Collision Systems. See the following options below:
ECS Badgeless Lighting Package Honeycomb Grille - With Chrome Strip - ES2794987
ECS Badgeless Lighting Package Honeycomb Grille - With Red Strip - ES2794986
Bremmen Parts GTI Lighting Package Honeycomb Grille - With Chrome Strip - ES2794985
Bremmen Parts GTI Lighting Package Honeycomb Grille - With Red Strip - ES2794984
OEM GTI Lighting Package Honeycomb Grille - With Red Strip - ES2737892
OEM GTI Non-Lighting Package Honeycomb Grille - With Red Strip - ES2737349
|Manufacturer||Assembled By ECS|