The factory front control arms are an integral part of the B8/B8.5 Audi A4/S4 & A5/S5/RS5 suspension, but can start wearing out as early as 40,000 miles - especially on enthusiast-owned vehicles which are driven hard on the street or track. As the rubber bushings degrade and ball joints develop play, alignment is compromised and steering becomes less precise.
034Motorsport's complete Density Line Control Arm Kit is designed to be a performance replacement for all eight of the factory front upper and lower control arms. Featuring high-durometer rubber bushings and high-quality ball joints, Density Line Control Arms are engineered to limit unwanted deflection in the suspension, resulting in tighter handing and more precise steering response than even brand new factory control arms can offer.
- Front Lower Control Arms - Front (Left & Right)
- Front Lower Control Arms - Rear (Left & Right)
- Front Upper Control Arms - Front (Left & Right)
- Front Upper Control Arms - Rear (Left & Right)
- M14 Ball Joints (Pair)
- Installation Hardware Kit
Please Note: New Outer Tie Rod Ends are sold separately.
Installation Note: It is imperative that the suspension be compressed to static ride height before any suspension pivot bushings are tightened, as per the factory installation procedure. If this is not done, the bushings will tear
- Audi A4
Submodel Engine Years Sedan 2.0T 2009-2016
- Audi A4 Quattro
Submodel Engine Years Sedan 2.0T 2009-2016 Avant 2.0T 2009-2012 Sedan 3.2L V6 2009
- Audi S4
Submodel Engine Years Sedan 3.0T 2010-2016
- Audi S5
Submodel Engine Years Cabriolet 3.0T 2010-2015 Coupe 3.0T 2013-2015 Coupe 4.2L V8 2008-2013
- Audi RS5
Submodel Engine Years Cabriolet 4.2L V8 2013-2015 Coupe 4.2L V8 2010-2015
- Audi A5
Submodel Engine Years Coupe 2.0T 2012-2015 Cabriolet 2.0T 2010-2011
- Audi A5 Quattro
Submodel Engine Years Cabriolet 2.0T 2010-2015 Coupe 2.0T 2010-2015 Coupe 3.2L V6 2008-2010